Centrifuge Rotors
USA Scientific Inc Dual rotor personal cent
Personal Minicentrifuge, 8 place 1.5/2.0 mL microcentrifuge tube rotor with adapters for both 0.5 mL and 0.2 mL tubes, and PCR strip rotor for up to 6,500 rpm 2,5000 x g
Perkin Elmer US LLC Replacement Rotor for 1/8 6-Port Valve, Temperature T
The T type rotor material is designed for use in high-temperature applications, requiring the valve to be at or above 300°C. In order to seal properly and turn easily, after installation, the rotor should be temperature conditioned by brining the valve assembly to 325°C and cycling the valve (on-off) 10 times. The temperature of the valve then can be set according to the requirements of the user.
Sigma Aldrich Fine Chemicals Biosciences TPPR centrifuge tubes capa
The TPP 50 mL and 15 mL Centrifuge Tubes are compatible with all standard centrifuges and their innovative design focuses on a tight seal excellent transparency clear graduations and highly visible marking areas. The yellow screw cap closure on the TPP Centrifuge Tubes is tight and protected against overturning. The transparency of the tubes is excellent and the white marking areas on the top of the cap and side of the tube are highly visible. On the conical tubes the distinct white graduations are continued to the bottom of the tube to accommodate small sample volumes. On the 500 mL tubes the scale starts at 0.5 mL and on the 15 mL tubes the scale starts at 0.1mL. Temperature Range for Polypropylene Tubes -196C to 121C Polystyrene Tubes -40C to 70C Maximum RCF for Polypropylene Tubes 9400 x g* Polystyrene Tubes 1700 x g*.* Depending on adapter and temperature All Tubes are gamma Irradiated